Safety Brakes
The SITEMA Safety Brake type KSP is designed to hold a vertical moved mass in one direction (against gravity). The holding is done on a round shaft. This could be an already existing cylinder rod or a separate rod. The Safety Catcher can also be used to catch the falling load in case of an emergency-stop. The holding force is relatively big in one direction (downwards) and in the other direction (upwards) relatively small.
Safety brakes are already used in the following applications
- vertical or diagonal machine tool axes
- vertical axes of loaders
Applications
 FeederHolding up the vertical axis of a loader in case of a power-failure or emergency stop; safety for worker and machine. >> |
 Grinding machineVertical axis secured in case of a power-failure or emergency stop; safety for worker and machine >> |
 Axe robotiséHolding up the vertical axis of a loader in case of a power-failure or emergency stop; safety for worker and machine. >> |
Dimensions
SITEMA Safety Brakes
|
||||||
|---|---|---|---|---|---|---|
| Type | Ident.-No. | Rod Ø mm | Admiss. load kN | Release press. bar | Casing height mm | Casing Ø mm |
| KSP 16 | KSP 016 01 | 16 | 2 | 3,5 | 114 | 96 |
| KSP 22 | KSP 022 01 | 22 | 5 | 3,5 | 137 | 120 |
| KSP 22 | KSP 022 02 | 22 | 10 | 3,5 | 137 | 120 |
| KSP 25 | KSP 025 01 | 25 | 15 | 3,5 | 142 | 140 |
| KSP 28 | KSP 028 02 | 28 | 20 | 3,5 | 173 | 184 |